BASIC CIRCUIT THEORY

Aim: To design RC high pass filter and study its frequency response Apparatus Required: Theory: A filter is a circuit that passes a specific range of frequencies while rejecting other frequencies. A passive filter consists of passive circuit element such as capacitor, inductor and resistor. A highpass filter is formed when the output of an […]

Aim: To design RC low pass filter and study its frequency response. Apparatus Required: Theory: A filter is a circuit that passes a specific range of frequencies while rejecting other frequencies. A passive filter consists of passive circuit element such as capacitor, inductor and resistor. A typical low pass filter is formed when the output

Aim: Verification of Norton’s Theorem Components and Equipment Required:Variable power supply , 3 resistors, resistance box, constant current source, connecting wires Theory:  Norton’s theorem states that a linear two-terminal circuit can be replaced by an equivalent circuit consisting of a current source IN in parallel with a resistor RN, where IN is the short-circuit current

Aim: Verification of Maximum Power Transfer Theorem Components and Equipment Required:Beadboard, multimeter, connecting wires, DC power supply, resistor, resistance box  Theory: According to Maximum Power Transfer Theorem, a linear two terminal network consisting of a voltage source and resistance will transfer maximum power into a load connected between its two terminal when the load resistance

Aim: Verification of Thevenin’s Theorem Components and Equipment Required:Multimeter, power supply, breadboard, 3 resistors, connecting wires Theory:Thevenin’s theorem states that a linear two-terminal circuit can be replaced by an equivalent circuit consisting of a voltage source VTh in series with a resistor RTh, where VTh is the open-circuit voltage at the terminals and RTh is